Conveyor and Grain Elevator Adapter Bearing

These bearings are mounted units designed for use in equipment where round or hex shafts are supported. They combine a self-aligning bearing with seals, a square mounting flange into a compact pre-lubricated, easily installable unit. Typical applications include conveyor systems, and grain elevators.

Advantages

  • Heavy gauge stamped steel mounting flanges provide for a compact, space-saving design
  • Self-aligning design accommodates 3/8 inch of misalignment per foot of shaft length
  • Capacity for combined radial or thrust loads
  • Package construction needs no pre-installation adjustments, fitting or assembling
  • Over-size, factory packed lubricant chamber assures maximum life and operating efficiency without troublesome relubrication
  • Bearing races are hardened to resist wear, outers and inners are accurately formed for smooth running
  • Aetna's self-contouring, free-running, self-wiping seal provides positive contact under all conditions of misalignment
  • Full ball complement for high durability

Product Specifications

Conveyor and Grain, Elevator Adapter Bearings

Dimensions In Inches

PART
NUMBER
INNER
DESIGN
A B C D E F G H LOAD
CAPACITY
LBS
@ 500 RPM
WEIGHT
LBS
AG1008-E STD 1/2 2 2-13/16 2-29/32 .144 7/8 3/8 11/32 340 .59
AG1010-E STD 5/8 2 2-13/16 2-29/32 .144 7/8 3/8 11/32 340 .56
AG1012-E STD 3/4 2 2-13/16 2-29/32 .144 7/8 3/8 11/32 340 .53
AG1013-E STD 13/16 2 2-13/16 2-29/32 .144 7/8 3/8 11/32 340 .51
AG1014-E STD 7/8 2 2-13/16 2-29/32 .144 7/8 3/8 11/32 340 .49
AG1014-E2D D** 7/8 2 2-13/16 2-29/32 .144 1-1/4 3/8 11/32 340 .55
AG1014-EL L 7/8 2 2-13/16 2-29/32 .144 7/8 3/8 11/32 340 .47
AG1014-EP P 7/8 2 2-13/16 2-29/32 .144 1-1/4 3/8 11/32 340 .55
AG3014-EP* P 7/8 2 2-13/16 2-29/32 .190 1-1/4 3/8 11/32 340 .63

*Extra Heavy Gauge Steel
**Hex Bore

Drawing

Elevator Drawing

Start typing and press Enter to search

Overhead Door BearingRubber Tire Idler